Table of Contents
Advertisement
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
1
Preparing the Machine
No Parts Required
Procedure
1.
Park the machine on a level surface.
2.
Disengage the blade-control switch.
3.
Move the motion-control levers outward to the N
4.
Engage the parking brake.
5.
Shut off the engine and remove the key.
Description
No parts required
No parts required
Upper roll bar assembly
Left lower roll bar assembly
Right lower roll bar assembly
Fold-pin assembly
Shoulder bolt
Locknut (1/2 inch)
Bumper
Flange-head bolt (5/8 x 3-1/2 inches)
Locknut (5/8 inch)
Wave washer
Qty.
–
Prepare the machine.
Remove the existing rollover protection
–
system (ROPS).
1
1
1
2
2
Install the rollover protection system
(ROPS).
2
2
4
4
2
-L
position.
EUTRAL
OCK
2
Use
Advertisement
Table of Contents
