Installation; Preparing The Machine - Toro 161-4450 Manual

Assist Bar Kit
TimeCutter
Model No. 161-4450

Installation

Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
No parts required
Assist handle
Pin (grooved)
Washer (3/8 inch)
Retaining ring
Assist-handle bracket
Hex flange-head bolt (thread-forming—5/16
x 3/4 inch)
Pin (grooved)
Washer (3/8 inch)
Retaining ring
Handle retainer
Shoulder screw (1/4 x 1/2 inch)

Preparing the Machine

1. Park the machine on a level surface.
2. Disengage the blade-control switch.
3. Move the motion control levers outward to the
P position.
ARK
4. Shut off the engine and remove the key.
© 2023—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® /Titan ® Riding Mower
Qty.
–
Prepare the machine.
1
1
Assemble the assist handle.
1
1
1
Install the assist-handle bracket.
2
1
1 Install the assist handle.
1
1
Install the handle retainer.
1
Register at www.Toro.com.
Form No. 3465-892 Rev A
Installation Instructions
Use
*3465-892*
Original Instructions (EN)
Printed in the USA
All Rights Reserved