2.
Remove the nuts from the spindle in the right
deck pulley and use them to attach the pulley
assembly to the deck pulley
Note:
You may need to remove the mower belt
to relieve the tension off the deck pulley when
you install the pulley assembly. Refer to the
Operator's Manual for the machine.
Figure 4
1. Nut
2. Pulley assembly
3.
Using the 3 nuts that you removed previously, 1
carriage bolt (3/8 x 1-1/4 inches), and 2 carriage
bolts (3/8 x 1 inch), install the idler assembly to
the mower deck
(Figure
(Figure
3).
g037507
3. Spindle
4).
1. Carriage bolt (3/8 x 1-1/4
inches)
2. Idler assembly
5
Figure 5
3. Carriage bolt (3/8 x 1 inch)
4. Nut (below the mower
deck)
g037508