Advertisement
4.
Install the sheave assembly to the spindle using
the washer and top nut
Figure 9
1. Top nut
2. Washer
5.
Torque the top nut to 176 to 217 N∙m (130 to
160 ft-lb).
Note:
Ensure that the sheave spins freely.
(Figure
9).
g302413
3. Sheave assembly
4. Spindle
6.
Align the new pulley assembly so that the
openings fit over the nuts
1. Pulley assembly
7.
Turn the pulley to lock it into position
Note:
If the pulley does not turn, loosen the
nuts more to raise the nuts and allow the pulley
to lock into position.
1. Pulley assembly
8.
After the new pulley assembly is in position,
tighten the nuts to secure new pulley assembly.
Torque the 3 nuts to 28 to 34 N∙m (21 to 25 ft-lb).
9.
Install the deck belt.
7
(Figure
10).
Figure 10
2. Nuts
(Figure
Figure 11
g302411
11).
g302414
Advertisement
