Table of Contents
Advertisement
2. Lift the bagger top and install the bags by sliding
the bag frame hooks onto the retaining brackets
(Figure 9).
4
3
G005672
1. Bag
2. Bagger frame
3. Lower the bagger top onto the bag (Figure 10).
Figure 10
1
2
Figure 9
3. Retaining bracket
4. Bag frame hook
G005757
4
Completing the Installation
No Parts Required
Procedure
This kit requires the simultaneous installation of other
finishing kits to function properly. Contact your
Authorized Service Dealer to obtain the corresponding
necessary parts. For more information, visit us at
www.Toro.com.
Once the Finishing Kit is installed, use the following
Operation and Maintenance sections for use and care of
the entire bagger attachment.
7
Advertisement
Table of Contents
