Checking That Your Oven Is Operating Correctly; Setting The Time - Samsung MG23J5133 Series User Manual

Hide thumbs Also See for MG23J5133 Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 162
Oven use

Checking that your oven is operating correctly

The following simple procedure enables you to check that your oven is working
correctly at all times.
Open the oven door, and place a glass of water on the turntable. Then, close the
door.
1
2
NOTE
The oven must be plugged into an appropriate wall socket. The turntable must be
in position in the oven. If a power level other than the maximum is used, the water
takes longer to boil.
12 English
MG23J5133AM_EO_DE68-04328J-04_EN.indd 12
MG23J5133AM_EO_DE68-04328J-04_EN.indd 12
1.
Press the +30s button and set the time
to 4-5 minutes by pressing the +30s
button the appropriate number of
times.
2.
Press the START button.
Result:
The oven heats the water for
4 to 5 minutes. The water
should then be boiling.

Setting the time

When power is supplied, "88:88" and then "12:00" is automatically displayed on
the display.
Please set the current time. The time can be displayed in either the 24-hour or
12-hour notation. You must set the clock:
When you first install your microwave oven
After a power failure
NOTE
Do not forget to reset the clock when you switch to and from summer and winter
time.
1.
2.
1
3.
2
3
4.
4
6
5.
6.
5
7
7.
Press the Clock button.
Press the Up/Down button to set time
display type. (12H or 24H)
Press the Select button to complete the
setup.
Press the Up/Down button to set the
hour.
Press the Select button.
Press the Up/Down button to set the
minute.
When the right time is displayed, press
the Select button to start the clock.
The time is displayed
Result:
whenever you are not using
the microwave oven.
23/7/2022 1:18:30 PM
23/7/2022 1:18:30 PM

Advertisement

Table of Contents
loading

Table of Contents