Cable
RAID flash power module
1
cable
Intrusion switch cable
2
Optical/tape drives
Use this section to understand the cable routing for server models with optical/tape drives.
1
ODD/Tape drive power connectors
ODD/Tape drive SATA connectors
2
Fixed power supply
Use the section to understand the cable routing for the fixed power supply.
Notes:
• Ensure that all cables are routed through the correct cable clips.
• As the processor power connectors on the power distribution board may look similar in appearance, make
sure that the
power supply processor power cable and
2
illustrated.
From
Flash power module connector on the
RAID adapter
Intrusion switch
From
RAID Flash power module
Intrusion switch connector on the
system board
To
ODD/tape drive power connector on the system
board
SATA 6, 7
processor power cable are routed correctly as
3
Chapter 2
To
.
Server components
39