Install A Pcie Adapter - Lenovo ThinkSystem ST250 V2 Setup Manual
Hide thumbs
Also See for ThinkSystem ST250 V2:
- Quick start (2 pages) ,
- Maintenance manual (260 pages) ,
- Reference (200 pages)
Table of Contents
Advertisement
Figure 41. Installing the RAID flash power module and bracket assembly onto the chassis
Step 3.
Connect the RAID flash power module cable to the RAID adapter. See
flash power module" on page
Note: Make sure that the RAID flash power module cable connector is fully seated in place as
illustrated when being plugged into the connector on the 9350-8i or 9350-16i RAID adapter.
Install a PCIe adapter
Use this information to install a PCIe adapter.
About this task
To avoid potential danger, read and follow the following safety statements.
• S002
38.
"Intrusion switch and RAID
.
Chapter 3
Server hardware setup
85
Advertisement
Table of Contents
