Configuration - Henny Penny FlexFusion ELECTRIC SPACESSAVER Service Instructions Manual

10.2.2 Configuration

Connector X1
Connector X2, X3, X4 Not assigned
Connector X5 CAN bus line to the motor M10
Connector X6 Not assigned
Connector X7 MMI communication
Connector X8 Digital key contains device-specific information.
Connector X9 (24V DC)
Connector X10 (208V AC)
Connector X11 (208V AC)
Connector X12 (208V AC)
Connector X13 (potential-
Connector X14 (potential-
No.
1 Input 10.7 V AC for lighting
2
3/4 Power supply I/O board 18V AC
No.
1/2 Supply for control panel (MMI)
No.
1 Supply voltage for relay
2 Output K1, main contactor Q1
3 -
4/5 N
No.
optional
1 Output K1, POS A
2 Output K2, POS B
3 Input 208V, POS C
4 -
5 N
No.
1 Output K17, WaveClean pump G16
2 Output K3, magnetic valve K23
3 Output K4, solenoid valve K12
4 Output K5, siphon pump G24
5 Output K6, backup relay
6 -
7 N
Not assigned
free)
No.
free)
1 Input K11, cooling fan G7 (208V AC)
2 Output K11, cooling fan G7 (208V AC)
Service-instructions
Description
Description
Description
Description
Description
Description
Electronics
53