The 2 DIP switch settings and descriptions:
4 5 6
1
2
ON
LFPP means Link Fault Passthrough PoE Control.
LFPP ON:
LFPP OFF: The IGUP-805AT LFPP is inactivated.(default)
2.4 Wiring the Power Inputs
The 6-contact terminal block connector on the top panel of Industrial PoE++
Media Converter is used for two 12-54V DC redundant power inputs. Please
follow the steps below to insert the power wire.
Caution
1. Insert positive and negative DC power wires into contacts 1 and 2 for
POWER 1, or 5 and 6 for Power 2.
DIP
1
LFPP
2
PoE
1. The IGUP-805AT will disable PoE port once it detects the fiber
optic link is down.
2. The IGUP-805AT will turn on fiber alarm.
When performing any of the procedures like inserting the wires
or tightening the wire-clamp screws, make sure the power is
OFF to prevent from getting an electric shock.
Max. Fault Alarm Loading: 24V, 1A
1 2 3 4 5 6
V1+
PWR1
ON
Enable
Legacy
1
2
ON
V2+
DC Input:
Alarm
PWR2
12-54V
, 6A max.
OFF
Disable (default)
BT (default)
7