Table of Contents
Advertisement
6. Fiber and PoE Installation
The IGUP-805AT is flexible enough to extend the distance from 550m to
120km. It depends on the 1000BASE-X or 100BASE-FX SFP transceivers. The
SFP transceivers are hot-pluggable and hot-swappable. You can plug in and
out the transceiver to/from any SFP port without having to power down the
Industrial 802.3bt PoE++ Media Converter.
If there is any IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt device needed to be
powered on, the IGUP-805AT can easily do just that.
The IGUP-805AT needs 12-54V DC input and it injects the DC power into the
pin of the twisted-pair cable.
Monitoring
Center
Fiber Switch
Data
1000
IGUP-805AT
550m / 120km
1000
PoE
DC
DC 12~56V
Power
PoE
IP Speed Dome
DC
PoE
Data
Power
100m
1000BASE-SX/LX Fiber Optic
1000BASE-T UTP with PoE
Power Line (DC)
15
Advertisement
Table of Contents
