■ Gigabit Fiber Interface
LED
Color
Green
Fiber
LNK/ACT
Amber
3.3 Wiring the Power Inputs
The 6-contact terminal block connector on the top panel of Industrial PoE++
Media Converter is used for two 12-56V DC redundant power inputs. Please
follow the steps below to insert the power wire.
When performing any of the procedures like inserting the wires
or tightening the wire-clamp screws, make sure the power is
OFF to prevent from getting an electric shock.
Caution
1. Insert positive and negative DC power wires into contacts 1 and 2 for
POWER 1, or 5 and 6 for Power 2.
Function
Lights to indicate that the fiber optic port is
successfully connecting to the network at 1000Mbps.
Blinks to indicate the fiber optic port is receiving or
sending data.
Lights to indicate that the fiber optic port is
successfully connecting to the network at 100Mbps.
Blinks to indicate the fiber optic port is receiving or
sending data.
Max. Fault Alarm Loading: 24V, 1A
1 2 3 4 5 6
V1+
V2+
PWR1
Alarm
PWR2
DC Input:
12-56V
, 6A max.
11