I Installation procedure
(1) Mount the suction cup HP sensor (SL1) on the bracket.
(2) Loosely attach the bracket.
(3) Secure the bracket so that the SL1 end face is flush with the actuator end face when
the distance between the side plate end face and roller bearing end face is 95.0 mm.
Side plate
FRONT
Roller bearing
IP removal arm
(4) Install the IP removal unit and cassette set unit by reversing their removal procedures.
009-058-00
10.20.2000 FM2732 (2)
95.0 mm
Roller bearing
Actuator
SL1
OK
CR-IR347 Service Manual
IP removal unit
End face
Actuator
end face
Bracket
MC - 82
SL1 end face
Actuator
SL1 end face
end face
NG
FR7H3204.EPS
MC - 82