Siemens FUJI-Reader CR-IR347 Service Manual page 144

REFERENCE
When removing rubber roller B, remove rubber roller A as well.
#1
[Remove] E6
Timing belt pulley
Housing
Roller bearing
CHECK
I Installation procedure
N INSTRUCTION N
The extension spring size varies with the mounting location. Pay due attention to the
extension spring mounting locations.
N NOTE N
Ensure that the rubber rollers are not installed with right and left reversed.
To accomplish installation, reverse the removal procedure.
I Check procedure
Make sure that the anti-static member is brought into contact with the roller.
009-058-02 009-058-00
08.30.2001 FM3142 10.20.2000 FM2732 (2)
#2
[Remove] Extension spring (L = 84 mm)
Rubber roller A
Rubber roller B
CR-IR347 Service Manual
Anti-static member
CHECK
Anti-static member
CHECK
[Remove] Extension spring
MC - 137
IP removal unit
lower assembly
Housing
Roller bearing
#3
[Remove] Gear
#4
(L = 90 mm)
FR7H3250.EPS
MC - 137