Table of Contents
Advertisement
(8) Using two screws, secure the subscanning controller assembly in place.
REFERENCE
For units with serial number 5005 or later, attach three ground cables.
(9) Connect the following connectors.
• SCN08D CN7–9, 12
• SCR08D CN3, 6
• CN-Z12
(10) Reinstall the following covers.
• Inner right-hand side cover
• Lower right-hand side cover
• Lower front cover
"3. Removing and Reinstalling Covers
I Check procedure
• Check that the high-voltage switch (S1) on the SCN08D board is ON.
• Check the image.
009-058-02
08.30.2001 FM3142
"9.3 Checking for Image Problems"
CR-IR347 Service Manual
MC - 353.6
MC - 353.6
Advertisement
Table of Contents
