Siemens FUJI-Reader CR-IR347 Service Manual page 38

I Check procedure
(1) Check that the cassette hold solenoid is in the following state:
G Normal condition
The hold pin end must be raised above the guide plate by the action of the extension
spring.
G When the lever is lowered
The hold pin end must not be positioned above the guide plate.
Guide plate
Hold pin
Guide plate
Hold pin
Normal
N NOTE N
If the hold pin is positioned above the guide plate when the lever is lowered, the cassette
is damaged when it is inserted into position.
(2) Complete installation by reversing the removal procedure.
009-058-00
10.20.2000 FM2732 (2)
Lever lowered
CR-IR347 Service Manual
[Lower] Lever
Extension spring
MC - 31
FR7H3314.EPS
MC - 31