Tool
DIN 5264 screwdriver with size 0.5 x 3 mm (article number of the screwdriver: 3RA2908-1A)
Disconnecting spring-loaded terminal
Step
Instructions
1
Insert the screwdriver into the rec‐
tangular opening of the spring-type
terminal until it engages.
2
Remove the cable from the oval
opening.
3
Remove the screwdriver.
11.11
Attaching the terminals
Hazardous voltage
Can cause death, serious injury, or property damage.
Turn off and lock out all power supplying this device before working on this device.
Requirements
You must have removed the terminals, for the purpose of replacing a device, for example.
Attaching the terminals
Note
Screw terminals/push-in terminals
Screw and push-in terminals are inserted into the module using the same principle.
3RS2 temperature monitoring relay
Equipment Manual, 02/2022, A5E42462552002A/RS-AB/002
WARNING
11.11 Attaching the terminals
Figure
Connection
83