Disconnecting Screw Terminals; Wiring Rules For Spring-Type Terminals (With Push-In Technology) - Siemens 3RS2 Manual

Connection

11.8 Wiring rules for spring-type terminals (with push-in technology)

11.7

Disconnecting screw terminals

Hazardous voltage
Can cause death, serious injury, or property damage.
Turn off and lock out all power supplying this device before working on this device.
Tool
Cross-tip screwdriver size PZ 1 x 80
Disconnecting
Step
1 Unscrew the screw of the screw terminal.
2 Remove the cable from the unscrewed screw ter‐
minal.
11.8 Wiring rules for spring-type terminals (with push-in technology)
Notes on handling spring-type terminals with push‑in technology
The terminal space for the spring-type terminals is rectangular. The maximum overall
dimensions of the conductor to be wired must not exceed 2.4 x 2.8 mm.
Take note of the orientation of the terminal space, which may require vertical fitting of
rectangular-crimped conductors.
80
WARNING
Instructions Figure
3RS2 temperature monitoring relay
Equipment Manual, 02/2022, A5E42462552002A/RS-AB/002