Mounting on a standard rail
Step
1
Place the back of the device onto the upper edge
of the standard mounting rail.
2
Press the lower half of the device against the
standard mounting rail until the device engages.
12.5
Disassembling from a standard mounting rail
Hazardous Voltage
Can Cause Death, Serious Injury, or Property Damage.
Turn off and lock out all power supplying this device before working on this device.
Requirements
The terminals have been removed or disconnected.
Disassembling from a standard mounting rail
Step
1
Press the device downwards.
2
Pull the lower half of the device away from the
standard mounting rail.
3
Lift the device from the upper edge of the stand‐
ard mounting rail.
3RS2 temperature monitoring relay
Equipment Manual, 02/2022, A5E42462552002A/RS-AB/002
Instructions
WARNING
Instructions
12.5 Disassembling from a standard mounting rail
Figure
Figure
Mounting
89