Network setting for dual circuits
Figure 5-38
The process of setting IP for dual circuits is same as single circuit except that the same IP is
not allowed to be shared by two CUs.
In dual circuits topology, all control units must have the same subnet mask and gateway
address.
Note
The dual circuit feature for GH150 air-cooled converters will be delivered soon.
5.5.5
Setting the password of different accounts
Password setting requires Administrator right. Log in as Administrator before an attempt to
change or assign password.
Operator panel for SINAMICS Perfect Harmony GH150 air-cooled MV Converters
Function Manual, 12/2022, A5E51241343A
Settings network when dual circuits under "Administrator" account
Operator panel configuration
5.5 Setting HMI App
41