Enabling Remote Desktop On Operator Panel - Siemens Perfect Harmony GH150 Function Manual

Operator panel configuration
5.6 Enabling remote desktop on operator panel
5.6

Enabling remote desktop on operator panel

Remote desktop connection is enabled, bonded with default IP address in Siemens LDA factory.
The IP address of X2P1 might vary depending on your configuration. If you want to change the
IP address, keep in mind to set the RDP (Remote Desktop) firewall to only allow RDP traffic on
X2P1. Perform as following:
①
②
Figure 5-43
1. Go to the control panel->Administrative Tools
2. Windows Firewall with Advanced Settings
3. Inbound Rules
44
1 2
X2P1
X1P1
IPC Ethernet interfaces
Operator panel for SINAMICS Perfect Harmony GH150 air-cooled MV Converters
Function Manual, 12/2022, A5E51241343A