Advertisement
2
Connecting the Camera
Connect the output on the power cable to the power input on the camera then connect the input on the power
cable to the power adapter. The pair/reset button is used to restore factory default settings and to pair the
camera to your NVR (if network settings are changed or when adding a new camera).
Leave the antenna in a vertical
position for best reception.
1
2
Power
Output
Power Cable
Pair/Reset
Power
Input
3
Power
Input
Connect the power adapter to
a power outlet then press the
outlet's switch to the ON posi-
tion to supply power.
Power Adapter
Advertisement
