Connecting The Camera - Swann Enforcer Instruction Manual

2

Connecting the Camera

Twist to lock
1
connectors
Video & Power Cable
2
connects here
Power Splitter
4 3
4
AUDIO AUDIO
8 7
OUTPUT OUTPUT
For single camera packs, connect the supplied power adapter
directly to the power input on the video & power cable.
Video Input
Power Output
Video Output
Power Input
Power Adapter
3
Power Adapter
connects here
VIDEO INPUT VIDEO INPUT
3 1
2 1
VGA VGA
4 2
AUDIO AUDIO
6 5
INPUT INPUT
Video & Power Cable
Connect this to your DVR
Power Splitter
connects here
Connect to a spare
power outlet
RS485 RS485
12V 12V
LAN LAN
1.
Connect the video output and pow-
er input connections on the camera
to the corresponding connectors on
the supplied video & power cable.
2.
Connect the supplied power split-
ter to the power input on the video &
power cable (repeat this step if mul-
tiple cameras are included).
3.
Connect the supplied power
adapter to the other end of the pow-
er splitter then connect the power
adapter to a spare wall socket.
4.
Connect the video output on the
video & power cable to an available
camera input on your DVR. Twist the
connection to lock it in place.