Related Manuals for Swann NHD-816
Summary of Contents for Swann NHD-816
- Page 1 3MP HD Dome Security Camera For use with Swann 7300 Series HD NVRs INSTRUCTION MANUAL...
- Page 2 This camera can only be used in combination images and the built-in microphone allows you with Swann’s NVR-7300 HD network video record- to hear what’s happening. See everything during ers. the night with the latest infrared cut filter for The reset button is used to perform a factory amazing night vision up to 100ft/30m.
- Page 3 Choosing a location for your Camera Some things to consider when choosing a location - Think about the most likely way a potential offender may approach your home, use your cameras to give What you want to monitor and where you’ll get the you the best coverage of these areas.
-
Page 4: Connecting Your Camera
Connecting your Camera To connect your camera to the NVR, simply connect the supplied Ethernet cable to the LAN connection on the camera then plug the other end of the cable (1) into one of the IP camera inputs on the back of the NVR. eSATA AUDIO DC 48V... -
Page 5: Mounting Your Camera
Mounting your Camera The camera can be mounted onto a flat vertical or horizontal surface and must be of sufficient strength to hold the camera. To mount the camera - • Using a Phillips head screwdriver, remove the screw from the mounting clip. -
Page 6: Limited Warranty - Terms & Conditions
Swann. The exclusions in this warranty. Where applicable by end user is responsible for all freight charges in- local laws, regulations and legal rights will take curred to send the product to Swann’s repair cen-... -
Page 7: Fcc Verification
FCC Verification This equipment has been tested and found to comply with the limits for Class B digital device, pursu- ant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:... -
Page 8: Helpdesk/Technical Support
Helpdesk/Technical Support Technical Support E-mail: tech@swann.com Telephone Helpdesk USA Toll Free 1-800-627-2799 USA Parts & Warranty 1-800-627-2799 (M-F, 9am-5pm US PT) AUSTRALIA 1800 788 210 NEW ZEALAND Toll Free 0800 479 266 0808 168 9031 M816CAM040815E | © Swann 2015...