Page 1
Swann NVW-470 Firmware update guide This guide will help you install the latest firmware update to your NVW-470 system. This new firmware will have a new interface system and features to improve the user experience and performance of the system.
Page 2
Select the System menu option to open the Maintenance menu. Tap on the Upgrade button. Tap or select the firmware file that is saved on the USB flash drive/memory stick. Then, hit the Upgrade button below. Tap OK to continue the firmware upgrade and let it reboot.
Page 3
After the reboot, it will ask you to tap on the ‘+’ symbols for calibration. Then, the Wizard will appear. Please skip the Wizard by tapping on the X button on the top right corner. There is one more step to complete the firmware update.
Page 5
Set up the network WiFi settings on the main unit then, reconnect the power to the camera(s) and they should sync to the main monitor automatically. You can now use the updated quick setup guide to start using your ‘new’ NVW-470 system!