Raymarine AR200 Installation Instructions Manual page 70

5. Backbone terminator (A06031). Terminators must be fitted to both ends of the SeaTalkng
backbone.
6. Spur blanking plugs (A06032). Used to cover unused spur connections in 5–way blocks, T-piece
connectors, or the SeaTalk to SeaTalkng converter.
7. Spur connector right angled elbow (A06077). Used in confined spaces where a straight spur
cable will not fit.
SeaTalkng ® adaptors and adaptor cables
SeaTalkng adaptor cables are used to connect devices designed for different CAN bus backbones
(e.g.: SeaTalk or DeviceNet) to the SeaTalkng backbone.
1. 1 m (3.3 ft) SeaTalk (3 pin) to SeaTalkng converter cable (A22164 / A06073). Can be used to
connect a SeaTalk device to a SeaTalkng backbone via the SeaTalk to SeaTalkng converter, or
to connect a SeaTalkng product directly to a SeaTalk network.
2. 0.4 m (1.3 ft) SeaTalk (3 pin) to SeaTalkng adaptor cable (A06047). Can be used to connect a
SeaTalk device to a SeaTalkng backbone via the SeaTalk to SeaTalkng converter, or to connect
a SeaTalkng product directly to a SeaTalk network.
3. 0.4 m (1.3 ft) SeaTalk2 (5 pin) to SeaTalkng adaptor cable (A06048). Used to connect SeaTalk2
devices or networks to a SeaTalkng backbone.
4. SeaTalkng to DeviceNet (female) adaptor cables connect NMEA 2000 devices that use a
DeviceNet connector to the SeaTalkng backbone, or connects SeaTalkng devices to an NMEA
2000 network. The following cables are available:
• 0.4 m (1.3 ft) SeaTalkng to DeviceNet (female) adaptor cable (A06045).
• 1 m (3.3 ft) SeaTalkng to DeviceNet (female) adaptor cable (A06075).
5. SeaTalkng to DeviceNet (male) adaptor cables. Connect NMEA 2000 devices that use a
DeviceNet connector to the SeaTalkng backbone, or connect SeaTalkng devices to an NMEA
2000 network. The following cables are available:
• 0.1 m (0.33 ft) SeaTalkng to DeviceNet (male) adaptor cable (A06078).
• 0.4 m (1.3 ft) SeaTalkng to DeviceNet (male) adaptor cable (A06074).
• 1 m (3.3 ft) SeaTalkng to DeviceNet (male) adaptor cable (A06076).
• 1.5 m (4.92 ft) SeaTalkng to DeviceNet (male) adaptor cable (A06046).
6. 1 m (3.3 ft) NMEA 0183 VHF stripped-end (2 wire) to SeaTalkng adapter cable (A06071). Used
to connect an NMEA 0183 VHF radio to the SeaTalkng backbone via the NMEA 0183 VHF to
SeaTalkng converter.
7. SeaTalkng (male) to DeviceNet (female) adaptor (A06082).
8. SeaTalkng (female) to DeviceNet (male) adaptor (A06083).
9. SeaTalkng (male) to DeviceNet (female) elbow (right angled) adaptor (A06084).