Raymarine AR200 Installation Instructions Manual page 68

1. 1 x 2 m (6.6 ft) Power cable (A06049). Used to provide 12 V dc power to the SeaTalkng backbone.
2. 1 x 1 m (3.3 ft) Spur cable (A06039). Used to connect a device to the SeaTalkng backbone.
3. 1 x 1 m (3.3 ft) NMEA 0183 VHF stripped-end (2 wire) to SeaTalkng adapter cable (A06071). Used
to connect an NMEA 0183 VHF radio to the SeaTalkng backbone via the NMEA 0183 VHF to
SeaTalkng converter.
4. 1 x SeaTalk to SeaTalkng converter (E22158). Each converter allows connection of 1 SeaTalk
device and up to 2 SeaTalkng devices.
5. 2 x Spur blanking plugs (A06032). Used to cover unused spur connections in 5-way blocks,
T-piece connectors and SeaTalk to SeaTalkng converter.
6. 2 x Backbone terminators (A06031). Terminators must be fitted to both ends of the SeaTalkng
backbone.
SeaTalkng ® spur cables
SeaTalkng spur cables are required to connect devices to the SeaTalkng backbone.
1. SeaTalkng spur cables:
• 0.4 m (1.3 ft) Spur cable (A06038).
• 1 m (3.3 ft) Spur cable (A06039).
• 3 m (9.8 ft) Spur cable (A06040).
• 5 m (16.4 ft) Spur cable (A06041).
2. 0.4 m (1.3 ft) Elbow (right angled) to elbow spur cable (A06042). Used in confined spaces where
a straight spur cable will not fit.
3. 1 m (3.3 ft) Elbow (right angled) to straight spur cable (A06081). Used in confined spaces where a
straight spur cable will not fit.