Raymarine AR200 Installation Instructions Manual page 69

4. SeaTalkng to stripped-end spur cables (Connects compatible product that do not have a
SeaTalkng connector such as transducer pods):
• 1 m (3.3 ft) SeaTalkng to stripped-end spur cable — A06043
• 3 m (9.8 ft) SeaTalkng to stripped-end spur cable — A06044
5. 0.3 m (1.0 ft) ACU / SPX autopilot to SeaTalkng spur cable (R12112). Connects the course
computer to the SeaTalkng backbone. This connection can also be used to provide 12 V dc
power to the SeaTalkng backbone.
SeaTalkng ® backbone cables
SeaTalkng backbone cables are used to create or extend a SeaTalkng backbone.
• 0.4 m (1.3 ft) Backbone cable (A06033).
• 1 m (3.3 ft) Backbone cable (A06034).
• 3 m (9.8 ft) Backbone cable (A06035).
• 5 m (16.4 ft) Backbone cable (A06036).
• 9 m (29.5 ft) Backbone cable (A06068).
• 20 m (65.6 ft) Backbone cable (A06037).
SeaTalkng ® power cables
SeaTalkng power cables are used to provide the SeaTalkng backbone with a single 12 V dc power
source. The power connection must include a 5 amp inline fuse (not supplied).
1. 2 m (6.6 ft) Power cable (straight) (A06049).
2. 2 m (6.6 ft) Elbow (right angled) power cable (A06070).
SeaTalkng ® connectors
SeaTalkng connectors are used to connect SeaTalkng devices to the SeaTalkng backbone and
to create and extend the backbone.
1. 5-Way connector (A06064). Each connector block allows connection of up to 3 SeaTalkng
devices. Multiple connector blocks can be 'daisy chained' together.
2. T-piece (A06028). Each T-piece allows connection of one SeaTalkng device. Multiple T-pieces
can be 'daisy chained' together.
3. Backbone extender (A06030). Used to connect 2 backbone cables together.
4. Inline terminator (A80001). Used to connect a spur cable and SeaTalkng device at the end of a
backbone instead of a backbone terminator.