Table of Contents
Advertisement
Hose and cord lengths
Your services can be installed to either the left-hand or right-hand side
z
of the product in an adjacent cabinet. Refer to 'Cabinetry preparation' for
service access requirements.
The drain hose should not extend more than 13ft (4m). A longer drain
z
hose will cause reduced performance.
Water connection
The dishwasher should not be connected to a water system where there
z
is no temperature control, unless the system is fitted with a suitable
tempering valve.
The dishwasher must not be connected to an undersink high-pressure
z
push-through hot water system, as damage to the system will result.
Maximum water temperature: 140°F (60°C).
z
3/4" BSP connection to product inlet valve.
z
Ensure water connection complies with local plumbing regulations.
z
Water pressure
0.03-1MPa
z
Electrical requirements
120V, 60Hz, Maximum current 8.9A
z
Anti-flood protection
This dishwasher has anti-flood protection, which will stop the water
z
flowing in the event of a leak within the machine.
10
PLUMBING & ELECTRICAL CONSIDERATIONS
b
c
SERVICE DIMENSION
A Length of drain hose
B Distance from floor to top of hose support
C Minimum distance from floor to end of drain hoses*
*standpipe install illustrated. Distance is the same for all plumbing installs.
a
a
LEFT SIDE
INCH
64 15/16
29 1/2
750 – 883
– 34 3/4
19 11/16
b
c
RIGHT SIDE
MM
INCH
MM
1650
51 3/16
1300
29 1/2
750 – 883
– 34 3/4
500
19 11/16
500
Advertisement
Table of Contents
