Related Manuals for Fisher & Paykel DW24UT2I2
Summary of Contents for Fisher & Paykel DW24UT2I2
- Page 1 BUILT-UNDER DISHWASHER INTEGRATED DW24UT2I2 & DW24UT4I2 models INSTALLATION GUIDE US CA 592981A 09.22...
-
Page 3: Safety And Warnings
SAFETY AND WARNINGS WARNING! WARNING! Electric Shock Hazard Cut Hazard Failure to follow this advice may result in Failure to use caution could result in injury. electrical shock or death. • Take care – panel edges are sharp. • This appliance must be earthed. This appliance has a cord with an equipment-earthing conductor WARNING! and an earthing plug. -
Page 4: Installation
SAFETY AND WARNINGS WARNING! Failure to install the custom panels correctly could invalidate any warranty or liability claims. To reduce the risk of fire, injury to persons or damage when using the appliance, follow the Installation of this dishwasher requires basic mechanical and electrical skills. important safety instructions listed below. -
Page 5: Components Required
COMPONENTS REQUIRED PARTS Keep all packing materials until the unit has been inspected. Components for new installation only (available in hardware stores) Inspect the product to ensure there is no shipping damage. If any damage is detected contact the dealer or retailer you bought the product from to report the damage. Fisher &... - Page 6 COMPONENTS REQUIRED TOOLS Not supplied Supplied Powered driver Cross-head screw driver Flat-head screw driver Box cutter Phillips head key Allen Key 1/4" (6mm) and Nutdriver 1/4" (6.35mm) Adjustable wrench 6" Measuring tape 3/16" (4mm) and 5/16" (7.94mm) (152.4mm) Safety glasses Flashlight Gloves Bucket - for flushing...
-
Page 7: Product Dimensions
PRODUCT DIMENSIONS PRODUCT DIMENSIONS INCH 33 3/4 A Overall height* 857 – 917 – 36 1/8 B Overall width** 23 7/16 C Overall depth** 21 13/16 D Height of chassis 33 3/4 E Depth of chassis 20 1/2 F Height of feet* 0 – 2 3/8 0 – 60 G Depth of toe kick recess 4 9/16... -
Page 8: Custom Panel Dimensions
CUSTOM PANEL DIMENSIONS Material specifications Maximum weight of door panels must not exceed 22lb (including handle) The panel should be adequately sealed to withstand moisture (122°F (50°C) 80% RH). The back and sides of the panel should be completely sealed with a waterproof vapour barrier, such as polyurethane, to prevent damage. - Page 9 CABINETRY DIMENSIONS CLEARANCES Connections can be located in an adjacent cabinet on either side of the dishwasher*** PLAN ISOMETRIC CABINETRY DIMENSIONS INCH CABINETRY CLEARANCES INCH A Minimum inside height* 33 3/4 A Minimum clearance to adjacent cupboard door 1/16 B Minimum inside width 23 5/8 B Minimum clearance to corner cupboard C Minimum overall depth**...
-
Page 10: Left Side
PLUMBING & ELECTRICAL CONSIDERATIONS Hose and cord lengths Your services can be installed to either the left-hand or right-hand side of the product in an adjacent cabinet. Refer to 'Cabinetry preparation' for service access requirements. The drain hose should not extend more than 13ft (4m). A longer drain hose will cause reduced performance. -
Page 11: Service Access
SERVICE ACCESS We recommend locating the service holes on either side of the dishwasher as shown. If the holes are created through wood, ensure the edges are smooth and rounded. If the holes are created through metal, ensure an edge protector is fitted. - Page 12 UNPACK PRODUCT CABINETRY PREPARATION Ensure all minimum cabinetry and Cut straps, lift carton off product and service specifications have been met remove the top cap. and that all services will be accessible Dispose of packaging responsibly. after installation. Ensure cabinetry floor is free from Remove the install kit, any internal bumps and obstructions that could packaging, all rubber bands and all tape.
- Page 13 SERVICES PREPARATION DOOR PANEL PREP Flush water line into a bucket. Ensure door panel meets Install a hand shut-off valve in a all specifications. readily accessible location in the adjacent cabinetry. Hot water line installations: Using the template as a guide, pre-drill Carefully route the hot water line all holes into the panel.
-
Page 14: Electrical Connection
PUSH INTO CAVITY ELECTRICAL CONNECTION Using a flat bladed screwdriver, turn to Unscrew and remove the junction box raise the leveling feet. Level the rear, cover to access the terminal block. outside legs first followed by the front Do not remove the screw holding the legs. - Page 15 INSTALL HARD PLUMBING SECURE DOOR PANEL Fitting copper pipe: Align the door panel to the product. Slot Slide the compression nut and ferrule slider bracket and upper screws into towards the end of the pipe. Insert the place. Slide the panel upwards to lock end of the pipe into the elbow and into place.
- Page 16 FIT EXIT VENT BALANCE DOOR Use a 4mm Allen key to adjust the door Measure the custom panel overhang tension. Rotate clockwise to increase from the base of the inner door. tension, rotate counterclockwise to Refer to the table below for the decrease tension.
- Page 17 SECURE TO CAVITY PLUMBING & ELECTRICAL CONNECTION Ø1 1/2" (38MM) STANDPIPE INSTALLATION Loosely fit 2 x side fixing screws. Install the drain hose support to the back wall, as close to the underside of the countertop as possible. Refer to 'Plumbing &...
- Page 18 PLUMBING & ELECTRICAL CONNECTION SINK TRAP/WASTE TEE INSTALLATION SINGLE AIR GAP INSTALLATION Install the drain hose support to the back wall, as close to the underside of Install your single Air Gap Kit to the the countertop as possible. Refer to benchtop like shown.
-
Page 19: Installer Checklist
INSTALLER CHECKLIST TEST OPERATION TO BE COMPLETED BY THE INSTALLER Installation … Check all parts are installed correctly and are secure. Turn power and water supply on and … Ensure all packaging, tape and rubberbands have been removed. open the dishwasher. …... - Page 20 INSTALL METAL PLATE TOE KICK INSTALL CONTINUOUS TOE KICK Refit the toe kick and mounting plate panels. Align toe kick to product and ensure all Slide the back of the mounting plate door swing clearances have been met. up or down to conceal any gaps left between the product and floor.
- Page 21 FISHERPAYKEL.COM © Fisher & Paykel Appliances 2022. All rights reserved. The models shown in this guide may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue.