Pickup Feed Unit; Before Removing The Pickup Feed Unit; Removing The Pickup Feed Unit - Canon iR C1020 Series Service Manual

Chapter 9
9.5 Parts Replacement Procedure

9.5.1 Pickup Feed Unit

9.5.1.1 Before Removing the Pickup Feed Unit

1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]
2) Remove the rear cover unit.(page 11-11)Reference [Removing the Rear
Cover Unit]
3) Remove the left cover.(page 11-13)Reference [Removing the Left Cov-
er]
4) Remove the right cover.(page 11-11)Reference [Removing the Right
Cover]
5) Remove the Front Cover Unit.(page 11-9)Reference [Removing the
Front Cover Unit]

9.5.1.2 Removing the Pickup Feed Unit

1) Remove the cover [1].
- 1 screw [2]
2) Remove the 2 plates [1]
- 2 screws [2]
[1]
3) Remove the PCB cover [1]
- 2 claws [2]
9-18
[1]
[2]
F-9-19
[2]
F-9-20
[1]
0019-5825
0019-5824
4) Disconnect the 4 connectors [1].
5) Remove the relay connector [2] and the harness [3] from the harness guide
[1].
[2]
F-9-21
[1]
F-9-22
[2]