Download Print this page

Scan; Scan List - Canon iR C1020 Series Service Manual

Advertisement

Check ID control card reader
Sub item
NCR-CRD
Display: presence/absence of NCR device or the card
CRD-KIND
Card type (the first 3-digit characters)
CRD-STYL
Card format (the second 3-digit characters)
READ-STS
Read status (the third 3/2-digit characters)
NCR-STS
Device status (the fourth character)
NCR-VER
Version of NCR device (4-digit numeric figures)
<SPEAKER>
Check SPEAKER
Sub item
ON
When "ON" is selected, increase the volume step by step from the minimum up to maximum whenever OK key is pressed. When reaching the
maximum volume, it goes back to the minimum volume through silent state.
MIN
When "MIN" is selected, set off the minimum volume with OK key.
MAX
When "MAX" is selected, set off the maximum volume with OK key.
VOL
Set off the volume according to the hardware volume.

18.5.2 SCAN

18.5.2.1 SCAN List

<ADJUST>
Sub item
WLVL-ADJ
Correct white level in copyboard scanning and stream scanning to determine shading target.
SCAN READ
Start copyboard scanning operation to read white level of the document (original).
FLOW SCAN
Start stream scanning operation to read white level at stream scanning.
READ
KDT-DF1-R
Display DT-DF1-R
KDT-DF1-G
Display DT-DF1-G
KDT-DF1-B
Display DT-DF1-B
KDT-DF2-R
Display DT-DF2-R
KDT-DF2-G
Display DT-DF2-G
KDT-DF2-B
Display DT-DF2-B
ADF-ADJ
Execute adjustment of ADF
DF-STRM
Not used
DF-SPEED
Not used
DF-OFFST
Not used
DF-POSAD
Not used
<SENSOR>
Checking Sensor
Sub item
HP-SENS
Home position sensor
1: HP, 0: anything other than HP
TP-SENS
Sensor for paper in tray
1: presence of paper, 0: no paper
REG-SENS
Pre-registration sensor
1: presence of paper, 0: no paper
ESS-SENS
Front door sensor
1: ON, 0: OFF
<ADFTEST>
ADF Feeding Test
Execute feeding operation according to the scanning feeding speed (specified in SPEED, 2-SIDE, COUNT)
Sub item
SPEED
Not used
2-SIDE
Select ON/OFF for duplex mode
T-18-60
TESTMODE > SYSTEM > ACC
Description
T-18-61
TESTMODE > SYSTEM > SPEAKER
Description
T-18-62
TESTMODE > SCAN > ADJUST
Description
T-18-63
TESTMODE > SCAN > ADJUST
Description
T-18-64
TESTMODE > SCAN > ADFTEST
Description
Chapter 18
0020-2025
18-35

Advertisement

loading

This manual is also suitable for:

Ir c1021i