Subaru Crosstrek 2016 Owner's Manual page 229

3-84
Instruments and controls/Multi function display
If the setting is not available, the following
notification will be displayed. In this case,
perform the setting procedure again.
Keyless access setting (models
with keyless access with push-
button start system )
Preparation for keyless access
settings
1. Perform the preparation steps accord-
ing to Preparation for car settings
2. Operate the
select the Keyless Access Setting item.
Then push the
Driver s door unlock setting
1. Perform the preparation steps accord-
ing to Preparation for keyless access
settings 3-84.
3-78.
or switch to 2. Operate the
select the Driver s Door Unlock item.
button. Then push the
3. The current setting will be displayed.
Push the
mode.
or switch to
button.
button to enter the selection