To Change The Cruising Speed - Subaru Crosstrek 2016 Owner's Manual

7-48
Starting and operating/Cruise control

To change the cruising speed

To increase the speed (by the RES/
SET switch)
Except Crosstrek models
Crosstrek models
Press the RES/SET switch to the RES
side and hold it until the vehicle reaches
the desired speed. Then, release the
switch. The vehicle speed at that moment
will be memorized and treated as the new
set speed.
U.S.-spec. models
When the difference between the actual
vehicle speed and the set speed is less
than 4 mph (6.8 km/h), the set speed can
be increased 1 mph (1.6 km/h) each time
by pressing the RES/SET switch to the
RES side quickly.
Except U.S.-spec. models
When the difference between the actual
vehicle speed and the set speed is less
than 4.4 km/h, the set speed can be
increased 1 km/h each time by pressing
the RES/SET switch to the RES side
quickly.
To increase the speed (by accel-
erator pedal)
1. Depress the accelerator pedal to
accelerate the vehicle to the desired
speed.
Except Crosstrek models
Crosstrek models
2. Press the RES/SET switch to the
SET side once. Now the desired speed
is set and the vehicle will keep running at
that speed without depressing the accel-