Subaru Crosstrek 2016 Owner's Manual page 118

perform the unlocking operation once
first. You can then touch the door lock
sensor to lock the doors.
Locking with the rear lock button
(5-door)
1) Rear lock button
Carry the access key, close all doors
including the rear gate and press the rear
lock button. The rear gate and all doors
will be locked. Also, an electronic chirp will
sound once and the hazard warning
flashers will flash once.
Power saving function
The keyless access function will be
disabled in the following cases to protect
the access key battery and the vehicle
battery.
Keys and doors/Keyless access with push button start system
. Case 1: When the keyless access
function and the remote keyless entry
system have not been used for 2 weeks
or longer while all doors are locked
To recover the keyless access func-
tion:
Operate one of the following items.
Unlock the doors by operating any
procedure other than gripping the front
passenger s door handle
Lock the doors
Open a door and then close it
. Case 2: When the access key has
been left in the operating range for 10
minutes or longer while all doors are
locked
To recover the keyless access func-
tion:
Operate one of the following items.
Unlock the doors by gripping the
door handle
Unlock the doors by pressing the
rear gate opener button
Lock the doors by touching the door
lock sensor
Lock or unlock the doors by using
the remote keyless entry system
Lock or unlock the doors by using
the power door locking switch
Open either of the front doors
Door unlock selection function
The door unlock selection function makes
the following operations possible.
. Unlocking the driver s door without
unlocking any other doors (including the
rear gate) when gripping the driver s door
handle
. Opening the rear gate without unlock-
ing any doors when pressing the rear gate
opener button (5-door)
The operational/non-operational setting
for this function can be changed by a
SUBARU dealer.
Operational:
. Only the driver s door will be unlocked
when the driver s door handle is gripped.
. The rear gate will open, but the other
doors will remain locked when the rear
gate opener button is pressed. (5-door)
Non-operational:
. All doors and the rear gate will be
unlocked when the driver s door handle is
gripped.
. The rear gate will open and all doors
will be unlocked when the rear gate
opener button is pressed. (5-door)
The factory setting (default setting) is set
as operational .
For further details, consult a SUBARU
CONTINUED
2-17