Introduction
Description
The Power Module is part of the modular SINAMICS G120 converter family. A converter consists
of a Control Unit and a Power Module.
You can operate the Power Module with one of the following Control Units.
• CU230P-2
• CU240B-2
• CU240E-2
• CU250S-2
A characteristic feature of the Power Module is dynamic regenerative braking with energy
feedback into the grid.
The Power Module is designed for mains voltages of 380 V to 480 V 3 AC. Depending on the
power rating, the Power Modules are supplied in frame sizes FSC to FSF.
The degree of protection is IP20.
• FSC
• FSD
• FSE
• FSF
The specified power ratings refer to Low Overload operation.
More information
Note
Commissioning the converter
You must first commission the converter before you can use it. Commissioning is described in the
operating instructions of the relevant Control Unit.
PM250 Power Module
Hardware Installation Manual, 04/2021, A5E36265179B-AB
7.5 kW ... 15 kW
18.5 kW ... 30 kW
37 kW ... 46 kW
55 kW ... 90 kW
Technical specifications (Page 53)
Manuals and technical support (Page 83)
3
17