Sony HDC5500 Operating Instructions Manual page 92

FILE
Page name Item
Page No.
<USER GAMMA> READ (USB t CAM)
F04
PRESET
Displayed only when
HZC-UG50 series is
FILE ID
installed
CAM CODE
DATE
<LENS FILE> STORE FILE
F05
No.
NAME
F NO
CENTER MARKER
H POS
V POS
STORE
<OHB FILE> STORE FILE
F06
<MATRIX FILE> CUSTOM PRESET MATRIX
F07
STORE FILE
1
2
3
4
5
CLEAR ALL
READ (USB t CAM)
WRITE (CAM t USB)
FILE ID
CAM CODE
DATE
<BOX CURSOR FILE> 1:
F08
2:
3:
4:
5:
STORE
READ (USB t CAM)
WRITE (CAM t USB)
Settings
Execute using ENTER.
Execute using ENTER.
Max. 14 characters
Camera code
Date
Execute using ENTER.
1 to 17, 1
F1.0 to F3.4, F1.7
–48 to +48, 0
–27 to +27, 0
Execute using ENTER.
Execute using ENTER.
Execute using ENTER.
Execute using ENTER.
Execute using ENTER.
Execute using ENTER.
Max. 14 characters
Camera code
Date
92
Description
Reads the user gamma file from a USB drive.
Sets the user gamma file items to the preset values
in internal memory.
Enters a comment for the user gamma file to be
written to a USB drive.
"To specify a character string" (page 30)
See
Display only
Display only
The center marker is not included.
1 to 16: When using a non-serial lens (When using a
large lens, this setting depends on the internal
setting of the lens.)
17: When using a serial lens
Changeable only when using a non-serial lens.
Changeable only when using a non-serial lens.
Sets and stores the center marker position:
H POS: Increasing the value moves the position to
the right.
V POS: Increasing the value moves the position
downwards.
Stores the offset values of items specific to the
CMOS image sensor (once stored, the values do not
need to be stored again if the sensor is reinstalled).
Stores and reads preset files:
When storing a preset file in camera memory,
specify the file number.
Clears all the files.
Loads five preset files from a USB drive to internal
memory.
Writes five preset files in the camera's memory to a
USB drive.
Enters a comment for the preset files to be written
to a USB drive.
"To specify a character string" (page 30)
See
Display only
Display only
BOX CURSOR FILE selection FILE name input.
Align the cursor to the left of the number to select
the BOX CURSOR FILE.
Align the cursor to the right of the number to enter
the BOX CURSOR FILE name.
"To specify a character string" (page 30)
See
Stores a BOX CURSOR FILE name in the camera.
Transfers a BOX CURSOR FILE from a USB drive to
the camera.
Transfers a BOX CURSOR FILE from the camera to a
USB drive.
.
.
.