Sony HDC5500 Operating Instructions Manual page 12

CE model:
For Europe and South Asia
PROD control
ENG
control
MIC LINE1
switch
a INTERCOM 1 and INTERCOM 2 controls and switches
The reception level controls are common to intercom 1 and
intercom 2. The talk lines can be set independently for
intercom 1 and intercom 2.
ENG (engineer line) control
Adjust the intercom audio listening level of the engineer
line.
PROD (producer line) control
Adjust the intercom audio listening level of the producer
line.
PGM1 (program 1) control
Adjust the audio listening level of program 1, and program
3 (when PGM3 VOLUME LINK is set to PGM1).
PGM2 (program 2) control
Adjust the audio listening level of program 2, and program
3 (when PGM3 VOLUME LINK is set to PGM2).
MIC LINE1 (intercom microphone line 1) switch
Select the talk line for intercom 1.
PROD: To talk over the producer line
OFF: To turn off the headset microphone for intercom
line 1.
ENG: To talk over the engineer line
MIC LINE2 (intercom microphone line 2) switch
Select the talk line for intercom 2.
PROD: To talk over the producer line
OFF: To turn off the headset microphone for intercom
line 2.
ENG: To talk over the engineer line
PGM2 control
PGM1
control
MIC LINE2
switch
TRACKER
control
LEVEL switch
TRACKER control
Adjust the intercom audio listening level at the TRACKER
page 13
connector ( ) on the connector panel when using the
connector for intercom.
LEVEL switch
REAR: The intercom audio listening level is adjusted
with the controls on this panel.
FRT: The intercom audio listening level is adjusted with
the INTERCOM LEVEL control on the front of the
camera.
b LIGHT switch
Set to ON to illuminate the operation panel.
c RET/ASSIGNABLE button A, B
Press the button to switch the function assigned to the
button on the <ROTARY ENCODER ASSIGN> page on/off.
When the return function is assigned, press the button to
display the return video signal on the viewfinder screen
while the button is pressed.
Turn the button to change the assigned function setting.
When the return function is assigned, you can change the
return signal channel.
d RET/ASSIGNABLE button C / DISP/MENU switch
Press the button to switch the function assigned to the
button on the <ROTARY ENCODER ASSIGN> page on/off.
When the return function is assigned, press the button to
display the return video signal on the viewfinder screen
while the button is pressed.
Turn the button to change the assigned function setting.
When the return function is assigned, you can change the
return signal channel.
When the DISP/MENU switch is set to the MENU position to
display the MENU screen, you can perform menu
operations using RET/ASSIGNABLE button C.
Connector panel
a
b
c
RET CTRL
FRONT MIC
d
LINE
DC IN 10.5-17V
e
a EARPHONE jack (4-pole mini jack)
Connect to a headset, or earphones with microphone (3-
pole/4-pole earphones), to input/output the intercom
audio signal.
For 4-pole earphones, the intercom line is linked to the
OPERATION LINK setting on the <EARPHONE> page in the
OPERATION menu.
12
REMOTE
EARPHONE DC OUT
CRANE
TRACKER
PROMPTER
/GEN
LOCK
AES/EBU
MIC LINE MIC
TEST
+48V +48V
OUT
OFF OFF
AUDIO IN
CH1 CH2
SDI
MONI
m
f
g
h
i
j
k
l