Sony HDC5500 Operating Instructions Manual page 48

OPERATION
Page name Item
Page No.
<EXT SWITCH> RET CTRL CONNECTOR
*1
18
RET1 Pin5:
page 53
*1: See .
RET2 Pin6:
RET3 Pin4:
INCOM1 Pin1:
INCOM2 Pin2:
Settings
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, INCOM1,
INCOM2, EXTENDER,
D.EXTENDER, 5600K, VF DETAIL,
SPIRIT LEVEL INDICATOR, FOCUS
ASSIST INDICATOR, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
RET1 SW TOGGLE, RET2 SW
TOGGLE, RET3 SW TOGGLE, VTR
S/S, TALLY R, TALLY G, TALLY Y,
FAN MAX, CURSOR ALL OFF,
DYNAMIC FOCUS, FLAG, AWB,
CALL, ZOOM(T), ZOOM(W),
DYNAMIC CONTRAST
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, INCOM1,
INCOM2, EXTENDER,
D.EXTENDER, 5600K, VF DETAIL,
SPIRIT LEVEL INDICATOR, FOCUS
ASSIST INDICATOR, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
RET1 SW TOGGLE, RET2 SW
TOGGLE, RET3 SW TOGGLE, VTR
S/S, TALLY R, TALLY G, TALLY Y,
FAN MAX, CURSOR ALL OFF,
DYNAMIC FOCUS, FLAG, AWB,
CALL, ZOOM(T), ZOOM(W),
DYNAMIC CONTRAST
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, INCOM1,
INCOM2, EXTENDER,
D.EXTENDER, 5600K, VF DETAIL,
SPIRIT LEVEL INDICATOR, FOCUS
ASSIST INDICATOR, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
RET1 SW TOGGLE, RET2 SW
TOGGLE, RET3 SW TOGGLE, VTR
S/S, TALLY R, TALLY G, TALLY Y,
FAN MAX, CURSOR ALL OFF,
DYNAMIC FOCUS, FLAG, AWB,
CALL, ZOOM(T), ZOOM(W),
DYNAMIC CONTRAST
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, INCOM1,
INCOM2, EXTENDER,
D.EXTENDER, 5600K, VF DETAIL,
SPIRIT LEVEL INDICATOR, FOCUS
ASSIST INDICATOR, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
RET1 SW TOGGLE, RET2 SW
TOGGLE, RET3 SW TOGGLE, VTR
S/S, TALLY R, TALLY G, TALLY Y,
FAN MAX, CURSOR ALL OFF,
DYNAMIC FOCUS, FLAG, AWB,
CALL, ZOOM(T), ZOOM(W),
DYNAMIC CONTRAST
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, INCOM1,
INCOM2, EXTENDER,
D.EXTENDER, 5600K, VF DETAIL,
SPIRIT LEVEL INDICATOR, FOCUS
ASSIST INDICATOR, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
RET1 SW TOGGLE, RET2 SW
TOGGLE, RET3 SW TOGGLE, VTR
S/S, TALLY R, TALLY G, TALLY Y,
FAN MAX, CURSOR ALL OFF,
DYNAMIC FOCUS, FLAG, AWB,
CALL, ZOOM(T), ZOOM(W),
DYNAMIC CONTRAST
48
Description
This function works when each pin of the RET CTRL
connector contacts with GND (pin 3).
TALLY R, TALLY G, TALLY Y are available only when
using the camera as a standalone device, and make
the tally lamp light. VTR S/S is available only when
using the camera as a standalone device, and
makes the R tally lamp light.
VTR S/S signal is embedded in the video.
Note
INCOM1 and INCOM2 are displayed on the UCJ
model only. ENG and PROD are displayed instead on
the CE model.