Sony HDC5500 Operating Instructions Manual page 63

MAINTENANCE
Page name Item
Page No.
<TEST OUT> OUTPUT
M12 (U13)
VBS-OUT
CHARACTER
GAIN
CHROMA
SETUP
DOWN CONVERTER
SELECT
ASPECT
SYNC-OUT
V-PHASE
H-PHASE
<SDI OUT> SDI-1
M13 (U14)
SDI-2
SDI-MONI OUT
CHARACTER
EMB AUDIO
DOWN CONVERTER
<TRUNK> TRUNK
M14
INTERFACE
AUX REMOTE
NETWORK TRUNK
LINK
<GENLOCK> REFERENCE
M15
GENLOCK
STATUS
FORMAT
PHASE
<DATE> DATE/TIME
M16
DATE FORMAT
<BATTERY ALARM> BEFORE END
M17
END
<SIMPLE PROTOCOL> TRANSPORT CONVERTER
MODE
M18
PORT
Settings
Display only
ON, OFF
–99 to +99, 0
–99 to +99, 0
OFF, ON
MAIN, RET, VF
SQ, EC
–999 to +999, 0
–999 to +999, 0
See "SDI output format with
master frequency of 1/1.001"
(page 64).
MAIN, VF, RET, SD-SDI, OFF
ON, OFF
OFF, MIC, PGM
SELECT MAIN, RET, VF
ASPECT SQ, EC
ON, OFF
232c, 422A
Synchronization status
ENABLE, DISABLE
V –1024 to 1023, 0
H –1700 to 1700, 0
2000 to 2035/01 to 12/00 to 31
00 to 23: 00 to 59
1 Y/Mn/D, 2 Mn/D, 3 D/M/Y
4 D/M, 5 M/D/Y, 6 M/D
11.5 to 17.0 V
11.0 to 11.5 V
DISABLE, ENABLE
REMOTE(RS-422A),
CRANE(RS-422A),
CRANE(RS-232C), WIRELESS SIDE
PANEL(RS-422A), WIRELESS SIDE
PANEL(RS-232C)
BAUDRATE 9.6kbps to 843.75kbps,
115.2kbps
Description
Displays the current format.
Displayed when OUTPUT is set to VBS.
Displayed when OUTPUT is set to VBS.
Displayed when OUTPUT is set to VBS (NTSC).
Displayed when OUTPUT is set to SD-SYNC or
HD-SYNC.
Sets the SDI-1 and SDI-2 output formats.
Displayed when SDI-MONI OUT is not set to VF.
Displayed when SDI-MONI OUT is set to SD-SDI.
Display only
Display only
Display only
Not displayed when a CCU is connected.
Y: Year
Mn: Month (numeric)
M: Month (English abbreviation)
D: Day
Enables transport conversion mode to enable
camera control using transmission lines/networks
with high latency, such as wireless transmission.
Sets the port to enable for transport conversion
mode.
WIRELESS SIDE PANEL(RS-422A) or WIRELESS SIDE
PANEL(RS-232C) can be selected only when an
HKC-WL50 Wireless Transmission Adaptor is
installed.
Communication speed
63