Sony HDC5500 Operating Instructions Manual page 11

f SDI 2 (serial digital interface 2) connector (BNC-type)
HDC5500: For HD-SDI signal, 3G-SDI signal, 6G-SDI signal,
and 12G-SDI signal output. Also for HD TRUNK signal
and UHD TRUNK signal input.
HDC3500: For 3G-SDI and HD-SDI signal output, or HD
TRUNK signal input.
During stand-alone operation, also used for inputting an
HD-SDI return signal.
When RET (return) is set to 1, this is displayed in the
viewfinder.
g SDI 3 connector (BNC-type) (HDC5500)
For HD PROMPTER signal output.
g PROMPTER2 connector (BNC-type) (HDC3500)
For prompter 2 signal output. Available only when
connecting a camera control unit with a prompter 2 input
connector.
h CALL button
When this button is pressed, the red tally lamp of the
RCP-3000/1000 series Remote Control Panel or the
MSU-1500/1000 series Master Setup Unit will light. Use to
call the operator of the RCP or MSU.
You can also assign other functions to this button, using the
menu displayed on the viewfinder screen.
Operation panel
UCJ model:
For USA, Canada, East Asia and other
countries
PGM1 control
INCOM level control
LEVEL/MIC switch
PGM2 control
Line select / Receive
MIX select switch
a INTERCOM 1 and INTERCOM 2 controls and switches
There are separate PGM1 and PGM2 controls, line select/
receive MIX select switch, LEVEL/MIC switch, and INCOM
level control for both intercom line 1 and intercom line 2.
PGM1 (program 1) control
Adjust the audio listening level of program 1, and program
3 (when PGM3 VOLUME LINK is set to PGM1).
PGM2 (program 2) control
Adjust the audio listening level of program 2, and program
3 (when PGM3 VOLUME LINK is set to PGM2).
LEVEL/MIC switch
REAR/ON: The intercom headset microphone is turned
on. The intercom audio listening level is adjusted
with the INCOM level control.
REAR/OFF: The intercom headset microphone is
turned off. The intercom audio listening level is
adjusted with the INCOM level control.
FRONT/OFF: The intercom headset microphone is
turned off. The intercom audio listening level is
adjusted with the INCOM level control and the
INTERCOM LEVEL control on the front of the
(page 10)
camera
INCOM level control
Adjust the intercom audio listening level. The intercom MIX
TALK (ENG or PROD), SIDE TONE, and TRACKER settings are
reflected in the intercom audio.
Line select / Receive MIX select switch
Select the intercom line.
PROD: Producer line
ENG: Engineer line
MIX: Receive mixed PROD/ENG audio. Select the
intercom talk line from the menu.
The default intercom line setting is ENG.
b LIGHT switch
Set to ON to illuminate the operation panel.
c RET/ASSIGNABLE button A, B
Press the button to switch the function assigned to the
button on the <REAR FUNCTION ASSIGN> page on/off.
When the return function is assigned, press the button to
display the return video signal on the viewfinder screen
while the button is pressed.
Turn the button to change the assigned function setting.
When the return function is assigned, you can change the
return signal channel.
d RET/ASSIGNABLE button C / DISP/MENU switch
Press the button to switch the function assigned to the
button on the <REAR FUNCTION ASSIGN> page on/off.
When the return function is assigned, press the button to
display the return video signal on the viewfinder screen
while the button is pressed.
Turn the button to change the assigned function setting.
When the return function is assigned, you can change the
return signal channel.
When the DISP/MENU switch is set to the MENU position to
display the MENU screen, you can perform menu
operations using RET/ASSIGNABLE button C.
11
.