Sony HDC5500 Operating Instructions Manual page 41

OPERATION
Page name Item
Page No.
<VF MARKER> MARKER
03 (U06)
LEVEL
CENTER
SAFETY ZONE
EFFECT
ASPECT
MASK
SAFETY
<VF DETAIL> VF DETAIL
04 (U02)
CRISP
FREQUENCY
FLICKER
AREA
ZOOM LINK
COLOR DETAIL
PEAK COLOR
CHROMA LEVEL
RETURN DISABLE
<DYNAMIC FOCUS> DYNAMIC FOCUS
05
FREQUENCY
ZOOM LINK
CRISP
LEVEL
PEAK COLOR
THRESHOLD
COLOR LEVEL
Settings
ON, OFF
WHITE, BLACK, DOT
MIN, 1 to 10, 4
ON, OFF
1, 2, 3, 4
ON, OFF
80.0, 90.0, 92.5, 95.0%
ON, OFF
ON, OFF
16:9, 15:9, 14:9, 13:9, 4:3
ON, OFF
0 to 15, 12
ON, OFF
80.0, 90.0, 92.5, 95.0%
ON, OFF, (ON), (OFF)
0 to 100%, (0 to 100%), 25%
–99 to +99, 0
9M, 14M, 18M
ON, OFF
10 to 100%, 100%
ON, OFF
0 to 100%, 50%
ON, OFF
YELLOW, RED, BLUE
ON, OFF
100%, 50%, 25%, 0%
ON, OFF
OFF, ON, (OFF)
EXTRA-LOW, LOW, MID, HIGH,
(AUTO)
ON, OFF
MODE1, MODE2, MODE3,
MODE4
0 to 100%, 50%
(5% increments)
0 to 99, 6
LOW, MIDDLE, HIGH,
VERY-HIGH
OFF, RED, BLUE, GREEN,
BROWN, PURPLE, YELLOW
0 to 99, 50
0 to 99, 19
41
Description
Sets the display of all markers on/off.
1: Full cross
2: Full cross with a hole
3: Center
4: Center with a hole
(4.3): If VF SCAN is set to 4:3 when HDLA is attached
(cannot be changed)
(ON): If VF SCAN is set to 4:3 when HDLA is attached
(cannot be changed)
Sets the darken level outside the aspect area.
For the safety marker in Aspect mode.
Settings in ( ): When HDLA is attached (cannot be
changed)
Selects whether to set VF DETAIL to OFF for RETURN
display.
(OFF): Displayed for formats other than 4K/HDR
format.
Sets the bandwidth of the 4K resolution high-
frequency signal to detect.
(AUTO): Displayed when ZOOM LINK is set to ON.
Sets characteristics according to the zoom position.
Sets the level at the WIDE position mark.
Adjust to eliminate minute components of the
detected signal.
Sets the brightness level of the marking signal.
Sets the threshold level for adding color specified
using PEAK COLOR.
Sets the saturation of the color of the PEAK COLOR
indicator.