Sony HDC5500 Operating Instructions Manual page 46

OPERATION
Page name Item
Page No.
<SWITCH ASSIGN2> LENS VTR S/S
*1
16 (U10)
page 53
*1: See .
FRONT RET1
FRONT RET2
HANDLE SW1
HANDLE SW2
ZOOM SPEED
Settings
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, INCOM1,
INCOM2, EXTENDER,
D.EXTENDER, 5600K, VF DETAIL,
SPIRIT LEVEL INDICATOR, FOCUS
ASSIST INDICATOR, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
RET1 SW TOGGLE, RET2 SW
TOGGLE, RET3 SW TOGGLE, VTR
S/S, TALLY R, TALLY G, TALLY Y,
FAN MAX, CURSOR ALL OFF,
FLAG, AWB, CALL, ZOOM(T),
ZOOM(W)
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, INCOM1,
INCOM2, EXTENDER,
D.EXTENDER, 5600K, VF DETAIL,
SPIRIT LEVEL INDICATOR, FOCUS
ASSIST INDICATOR, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
RET1 SW TOGGLE, RET2 SW
TOGGLE, RET3 SW TOGGLE, VTR
S/S, TALLY R, TALLY G, TALLY Y,
FAN MAX, CURSOR ALL OFF,
FLAG, AWB, CALL, ZOOM(T),
ZOOM(W)
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, INCOM1,
INCOM2, EXTENDER,
D.EXTENDER, 5600K, VF DETAIL,
SPIRIT LEVEL INDICATOR, FOCUS
ASSIST INDICATOR, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
RET1 SW TOGGLE, RET2 SW
TOGGLE, RET3 SW TOGGLE, VTR
S/S, TALLY R, TALLY G, TALLY Y,
FAN MAX, CURSOR ALL OFF,
FLAG, AWB, CALL, ZOOM(T),
ZOOM(W)
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, INCOM1,
INCOM2, EXTENDER,
D.EXTENDER, 5600K, VF DETAIL,
SPIRIT LEVEL INDICATOR, FOCUS
ASSIST INDICATOR, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
RET1 SW TOGGLE, RET2 SW
TOGGLE, RET3 SW TOGGLE, VTR
S/S, TALLY R, TALLY G, TALLY Y,
FAN MAX, CURSOR ALL OFF,
FLAG, AWB, CALL, ZOOM(T),
ZOOM(W)
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, INCOM1,
INCOM2, EXTENDER,
D.EXTENDER, 5600K, VF DETAIL,
SPIRIT LEVEL INDICATOR, FOCUS
ASSIST INDICATOR, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
RET1 SW TOGGLE, RET2 SW
TOGGLE, RET3 SW TOGGLE, VTR
S/S, TALLY R, TALLY G, TALLY Y,
FAN MAX, CURSOR ALL OFF,
FLAG, AWB, CALL, ZOOM(T),
ZOOM(W)
0 to 99, 20
46
Description
Assigns a function to the VTR START/STOP switch
on the mounted lens.
Note
INCOM1 and INCOM2 are displayed on the UCJ
model only. ENG and PROD are displayed instead on
the CE model.
VTR S/S is available only when using the camera as
a standalone device, and adds the REC signal to the
SDI signal. Pressing this button repeatedly, toggles
recording on/off. While recording, the tally lamp
lights in red.
Note
INCOM1 and INCOM2 are displayed on the UCJ
model only. ENG and PROD are displayed instead on
the CE model.