Sony HDC5500 Operating Instructions Manual page 58

PAINT
Page name Item
Page No.
<SHUTTER> SHUTTER
P16
ECS FREQ
<NOISE SUPPRESSION
SUPPRESSION>
P17
<FLICKER REDUCTION
REDUCTION>
P18
POWER LINE FREQUENCY 50 Hz, 60 Hz
MODE
GAIN
OFFSET
ACM TYPE
Settings
ON, OFF, (ON), (OFF)
59.94i: 1/100, 1/125, 1/250,
1/500, 1/1000, 1/2000
50i: 1/60, 1/125, 1/250, 1/500,
1/1000, 1/2000
29.97PsF: 1/40, 1/60, 1/100,
1/120, 1/125, 1/250, 1/500,
1/1000, 1/2000
25PsF: 1/33, 1/50, 1/100,
1/125, 1/250, 1/500, 1/1000,
1/2000
24PsF/23.98PsF: 1/32, 1/48,
1/96, 1/100, 1/125, 1/250,
1/500, 1/1000, 1/2000
59.94P: 1/100, 1/125, 1/250,
1/500, 1/1000, 1/2000
50P: 1/60, 1/125, 1/250,
1/500, 1/1000, 1/2000
59.94i: 59.96 to 4300 Hz
50i: 50.00 to 4700 Hz
29.97PsF: 29.97 to 2700 Hz
25PsF: 25.00 to 2300 Hz
24PsF/23.98PsF: 24.00 to
2200 Hz
59.94P: 59.96 to 4600 Hz
50P: 50.03 to 4600 Hz
0 to 100%
ON, OFF
ON, OFF, (OFF)
STANDARD, ACM, (OFF)
–99 to +99, 0
0 to 99
1, 2, 3, 4
58
Description
Settings in ( ): When a remote control unit/panel or a
CCU is not connected (cannot be changed)
Step shutter selection
(OFF): Displayed for normal speed formats other
than HFR.
Note
When you turn REDUCTION ON or OFF, noise may be
generated. This is not a malfunction.
Specifies the frequency of the lighting power
source.
STANDARD: Corrects flicker without adding an
image.
ACM: Corrects flicker by adding images.
(OFF): Displayed for normal speed formats other
than HFR.
Enabled only when STANDARD is selected.
Sets the correction gain.
Enabled only when STANDARD is selected.
Sets the brightness level that invokes correction.
Enabled only when ACM is selected.
Selects the combination of frames to add. More
frames are added as the value increases.