Standard Finisher Plus; Overview - Xerox D125 User Manual

18

Standard Finisher Plus

The Standard Finisher Plus acts as a communication device and provides a paper path
between the print engine, the required Interface Module/Interface Cooling Module, and
any third-party, Document Finishing Architecture (DFA) device that is attached to the
machine.
The Standard Finisher Plus supports a number of optional finishing devices ranging from
light-production print engines to futuristic devices that utilize other communication and
physical interfaces.

Overview

Note
The Standard Finisher Plus requires either the Interface Module or the Interface Cooling
Module (depending on your product and machine configuration).
The Standard Finisher Plus consists of these two modules:
®
Xerox D110/D125/D136 Printer 18-1
User Guide