Data Security; Electrical Requirements; Paper Handling; Print Server - Xerox D110 Specification

Specifications for the Xerox
Print Engines
• Monochrome Xerographic Engine
• Print Speeds
– 110 / 125 ppm (8.5 x 11 in./A4)
– 69 / 78 ppm (8.5 x 14 in./B4)
– 55 / 62 ppm (11 x 17 in./A3)
– 34 / 34 ppm (12 x 18 in./SRA3)
• Simplex or duplex printing
• Up to 1200 x 1200 dpi RIP resolution and up
to 2400 x 2400 dpi resolution with halftone screen
106 lpi (default) or 150 lpi (high quality mode)
• Front to back registration +/- 1.0 mm
(customer adjustable)
Document Storage
• 80 GB or larger Hard Drive with 14.6 GB for
document storage

Paper Handling

Stock weights and capacity:
• Tray 1*: 1,100 sheets – Standard selectable sizes:
Letter (8.5 x 11 in.), A4 (8.27 in. x 11.69 in.), JIS B5
(7.17 x 10.12 in.), Executive (7.25 x 10.5 in.)
• Tray 2*: 1,600 sheets – Standard selectable sizes:
Letter (8.5 x 11 in.), A4 (8.27 in. x 11.69 in.), JIS B5
(7.17 x 10.12 in.), Executive (7.25 x 10.5 in.)
• Tray 3-4*: 550 sheets each – 5.5 x 7.2 in. to 13.0 x
19.2 in. (140 x 182 mm (A5) to 330 x 488 mm (SRA3))
• Tray 5 Bypass Tray: 250 sheets – 3.93 x 5.82 in. to
13 x 19.2 in. (100 x 148 mm to 330 x 488 mm); 16 lb.
bond to 140 lb. index (52 gsm to 253 gsm)
• Optional High-Capacity Feeder: 2 trays, 2,000
sheets each – 8.5 x 11 in. (A4); 16 lb. bond to 80 lb.
cover (52 to 216 gsm)
• Optional 1-Tray Oversized High-Capacity Feeder:
2,000 sheets – 7.16 x 8.26 in. to 13 x 19.2 in. (182 x 210 mm
to SRA3); 18 lb. bond to 110 lb. cover (64 to 253 gsm)
• Optional 2-Tray Oversized High-Capacity Feeder:
4,000 sheets – 7.16 x 7.16 in. to 13 x 19.2 in. (182 x 182 mm
to SRA3); 16 lb. bond to 110 lb. cover (52 to 253 gsm)
• Coated Stocks: Refer to Customer Expectation
Document for approved Xerox coated stocks
®

Standard Finisher

• Multi-position stapling: single or dual 100-sheet
variable length
• 2- and 3-hole punch (North America); 2- and
4-hole punch (Europe and South America);
4-hole Swedish punch
• Stacker capacity: 3,000 sheets (20 lb. / 80 gsm);
Top tray: 500 sheets (20 lb. / 80 gsm)
• 200-sheet interposer for pre-printed and full-bleed
sheets – 8.5 x 11 in. to 11 x 17 in. (A4 to A3); 16 lb.
bond to 90 lb. cover (52 to 220 gsm)
Optional Booklet Maker Finisher
Includes features of the Standard Finisher
with a 2,000-sheet stacker tray plus:
• Automatically creates booklets of up to 25 sheets
(100 imaged sides with saddle stitching) – 8.5 x 11 in.,
8.5 x 14 in., 11 x 17 in., 12 x 18 in., 13 x 18 in.
(A4, B4, A3, SRA3)
*Capacity based on 16 lb. bond to 80 lb. cover (52 gsm to 216 gsm)
**Refer to the Install Planning Document for installation details
For more information, visit us at www.xerox.com, call 1-800-822-2200 in the U.S.
or 1-800-668-0199 in Canada or contact your Authorized Xerox
©2014 Xerox Corporation. All rights reserved. Xerox®, Xerox and Design® and FreeFlow® are trademarks of Xerox Corporation in the United States
and/or other countries. Updated 1/14 610P730334C
D110/D125 Printer
®
Optional Xerox SquareFold
®
Trimmer Module
• Square fold up to 25 sheets (100 pages)
• Face trim between 2 to 20 mm in 0.1 mm increments
• 64 to 300 gsm (uncoated); 106 to 300 gsm (coated)
• Accepts paper sizes: 8.5 x 11 in. SEF to 13 x 18 in.
(216 x 279 mm to 330 x 457 mm)
• Available with Booklet Maker Finisher only
Optional High-Capacity Stacker
with rollaway cart
• 5,000-sheet offsetting output stack tray; 7.2 x 8.3 in.
to 13 x 19.2 in. (B5 LEF to SRA3)
• 500-sheet top tray and includes one rollaway cart;
additional carts available
Optional Folder
• C-fold and Z-fold 8.5 x 11 in. (A4)
• Print on inside or outside of folded paper
• Folds 11 x 17 in. (A3) Z-fold for insertion into letter (A4)
document sets (Engineering Z-fold)
• Available with Standard Finisher, Booklet Maker Finisher
and Standard Finisher Plus
Optional GBC AdvancedPunch™
®
• Paper supported: 8.5 x 11 in. (A4) Long Edge Feed
(11 in. (297 mm) side only)
• 20 lb. bond to 80 lb. cover (75 to 216 gsm)
• Several customer replaceable Die Sets available
Additional (DFA) Finishing Solutions
Optional Standard Finisher Plus
• Stacker capacity of 2,000 sheets (20 lb. bond / 80 gsm)
• Same features as Standard Finisher with integrated
Document Finishing Architecture (DFA) architecture
required to enable a variety of third-party inline finishing
options including those listed below:
Optional GBC eBinder 200™
• Stack, punch and bind lay flat (8.5 x 11 in. (A4)) booklets
• Self-adjusting bind elements (one-size-fits-all)
available in black, navy blue, white and frost/clear
• Pass-through capability permits chaining other
finishing alternatives (available with Standard Finisher
Plus configurations only)
Optional Xerox Tape Binder
®
• Binds 15-125 sheets of 20 lb. (80 gsm) paper
• Individual tape refill provides 425 11 in. binds
• Can be combined with the Plockmatic Pro30™
Booklet Maker
Optional Plockmatic Pro30™
Booklet Maker
• Saddle stitch and fold from 2 sheets to 30 sheets,
producing up to a 120-page (20 lb. bond / 80 gsm)
booklet or simply fold a single sheet
• SquareFold Trimmer and Cover Feeder available
• Can be combined with the Xerox
®
Reseller.
®

Data Security

®
• Standard Secure Print, Authentication with LDAP/
Kerberos/SMB/CAC, Password Protected PDF, FIPS
140-2 encryption, S/MIME Encrypted Email, IPsec,
802.1X, SNMP v3.0, Email over SSL, Image Overwrite
(Immediate, Scheduled, On Demand) Hard Disk Data
Encryption, Audit Log Optional CAC, Secure Access
Unified ID System
• IPv6 Ready
• 256 Bit Encryption
• Common Criteria Certified

Electrical Requirements**

• Print Engine:
– 208 – 240 VAC, 60/50 Hz, 15/13 amp service
– KVA Rating: Max Power Consumption: 2.8 – 3.1 KVA
– Agency certification: ENERGY STAR
Europe: CE, NEMKO, WEEE compliance
• Optional Feeding/Finishing:
– Each module requires 100 – 240 VAC,
60/50 Hz power

Print Server

Xerox FreeFlow
®
Hardware Specifications
• Processor: 2.8 GHz Intel DUO E7400 CPU
• Processor Type: 2 x Intel Xeon Processors
• Hard drive: 1 x 250 GB
• Memory: 4 GB
• Operating System: Solaris
• Software/Vendor: FreeFlow Print Server
• Ports: 6 x USB 2.0, 1 serial
• 10/100/1000 BaseT Ethernet Ports
• Display: 19 in. screen
• Keyboard and mouse
• DVD-ROM/DVD-RW
• 10/100 switch
Client and Remote Support
• Choice of print drivers
– Support for Xerox
– Xerox
– Windows
– Macintosh
• Adobe
®
• HTTP and HTTPS browser submission support
• IPP for job submission and system status
• Support of IPv4 and IPv6 (dual mode supported)
Options
• FreeFlow Print Server Stand
• VI Compose (VIPP
• LCDS and IPDS enablement
Network Environments/Protocols
• TCP/IP, IPP AppleTalk
• DHCP
• SNMP MIB II support for third-party
administration tools
Tape Binder For more detailed specifications for the Xerox
Print Server, go to www.xerox.com/freeflow-specs
XD2BR-01UD
®
, CSA,
®
Print Server
®
10
®
Global Print Driver
® ®
fully featured print drivers
®
2000/XPR/Vista/7 full-featured drivers
®
OS 10.6 or higher for drivers
®
PostScript Printer Descriptions (PPD)
®
Interpreter)
®
, IPP
®
®
FreeFlow
®