4.1.4 What to do if PLC communication is not possible
(1)
In case of outlet installation, install a noise filter in the noise equipment
The outlet side should be connected directly to the wall outlet.
Moreover, if you connect to one port of the PLC wall outlet, connect a power strip with a noise filter
to the other, and connect other equipment to the power strip, you can make PLC performance
more enriched.
Connecting the PLC to a power strip is greatly affected by other devices and degrades the
performance of the PLC.
DA-PU100 Series Administrator's Manual
40
It is recommended to connect the
PLC directly to the wall outlet.
It is not recommended to connect
to the power strip of PLC.