When The Code Is Not Known - Panasonic TU-IRD10 Operating Instructions Manual

REFERENCE

When the Code is Not Known

Procedure for setting up remote using the numerical
buttons:
• Confirm the device is plugged in and operating
properly.
1. Press and hold both the MENU/SELECT and the
POWER button at the same time for at least five
seconds; then release both buttons.
2. Press the Mode button that you want to program
(DSS, TV, CBL, RCVR, VCR1, VCR2, AUX, or LD).
3. Press the VOL UP button to step to the next code.
4. Press POWER to send a test signal. If the code is
correct, the device will respond correctly.
– Repeat the preceding steps until the proper
device code is found. It may take several
attempts before the correct code is found.
5. When the correct code has been found (the device
turns on), press the MENU/SELECT button to store
the code.
For future reference, write down the code numbers for each device in the space provided:
TV
CBL
(cable box)
RCVR
(Receiver or Amplifier)
other component
1
4
4
7
R-TUNE
POWER
2
VOL
1
GUIDE
VCR1
VCR2
LD
(Laser Disc Player)
other component
2
3
5
6
8
9
0
TV/VIDEO 3
MUTE
CH
VOL
CH
SELECT
EXIT
MENU
5
45