Table of Contents
Advertisement
1.3 Available tools
The following three tools are available to support efficient work during new installation, maintenance,
and operation monitoring of the PLC adaptor.
No.
Tool
1
Setting Tool
2
Maintenance Tool
3
Monitoring Tool
Setting Tool
・A maximum of 1,024 units can be
collectively set with a csv file(shared
key, IP address etc.)
・Sequential setting by a csv file.
When
New installation
Performs parameter settings of multiple PLC adaptors
in batch during initial installation.
Maintenance
Confirms communication status during installation and
operation.
Changing parameter settings and firmware updating is
also possible.
Operation
Notifies when an error occurs in the PLC adaptor.
monitoring
It is possible to output the status of the PLC adaptor
as a log.
Maintenance Tool
・Confirms connection status
・Analysis during comm. failure
・Detects lost unit reliably by
comparison with initial settings
6
DA-PU100 Series Administrator's Manual
Abstract
Monitoring Tool
・Notifies by e-mail or alert when
disconnected or speed reduced
・Automatic recording of abnormal
situations
Advertisement
Table of Contents
