ZyXEL Communications XMG1930 Series User Manual page 41

Disconnect the power cord from the power outlet.
1
Disconnect the power cord from the AC power socket.
2
Installing the Retainer Clip
Install the retainer clip to prevent accidental removal of the power cord.
Loosely wrap the clip on the retainer to the power cord.
1
Push the pronged-end of the retainer clip into the Retainer Holder hole until it locks into place.
2
Slide the clip up to the end of the power cord.
3
Chapter 3 Hardware Panels
XMG1930 Series User's Guide
41